Filter
Top Products
Chapter 3: Working with Waypoints 53
3.3 Navigating to a Waypoint (GOTO)
You can navigate to an existing waypoint using the GOTO WPT OPTIONS soft key.
This can either be accessed by selecting the desired waypoint on screen with the
cursor or via the WPTS/MOB key.
... using the cursor
1. On the chart screen, move the cursor over the waypoint you wish to go to. The
cursor changes color and the Waypoint soft keys appear.
2. Press GOTO WAYPOINT.
... via the WPTS/MOB key
1. Press WPTS/MOB.
—or—
Press the GOTO soft key from the default chart screen.
2. Press GOTO WPT OPTIONS. The Waypoint List is displayed.
3. Using the trackpad (up/down) or rotary knob, highlight the waypoint you wish
to navigate to.
4. Press the GOTO soft key.
• A dashed Bearing from Origin to Destination (BOD) line is drawn between
the vessel’s original position and the waypoint. This line remains
unchanged as the boat moves.
• As the boat’s actual course varies from the original, a blue Bearing from
Vessel to Destination (BVD) line is drawn between your current position
and the waypoint. This line is updated as the boat approaches the way-
point.
D9811-1
GOTO
WAYPOINT
D9812-1
or
GOTO WPT
OPTIONS...
GOTO...
81295.book Page 53 Wednesday, December 20, 2006 2:48 PM