Filter
Top Products
18 A60 Dual Function Display
1.4 The Simulator
The A60 display includes a simulator
mode, with which you can practice operating
your display without data from a GPS antenna or a DSM. Before installation,
connect the display to a 12VDC power supply, fused at 4 amps by attaching the
red wire from the power lead to positive (+) and the black lead to negative (–).
The simulator mode is switched on/off in the System Setup Menu.
1. Press MENU. The main Setup window is displayed.
2. Use the trackpad (up/down) or rotary knob to highlight System Setup.
3. Press the trackpad (right) to select.
4. Use the trackpad (up/down) or rotary knob to highlight Simulator.
5. Press the trackpad (right) to select.
6. Press the trackpad (up/down) to highlight ON.
7. Press
ENTER to accept.
8. Press
CANCEL twice to return to the display screen.
The SIMULATOR message flashes at the top of the screen and simulated data is
displayed.
20
0
40
60
200 kHz
38
64
12nm N-UP RM
Position
N 26°39.618
W 078°31.961
D9789-1
FISHFINDER
SETTINGS
...
ZOOM
...
BOTTOM
LOCK
...
A-SCOPE
...
PRESENT
...
FISHFINDER
SETTINGS
...
ZOOM
...
BOTTOM
LOCK
...
A-SCOPE
...
PRESENT
...
58.8
ft
81295.book Page 18 Wednesday, December 20, 2006 2:48 PM