Filter
Top Products
Chapter 4: Using the Chartplotter 79
4. Continue entering new waypoints until your route is complete.
5. To save the route for later use (and rename it if desired):
Press SAVE ROUTE or ENTER. The Edit Route dialog box is displayed. Press
ENTER to accept the defaults. You can edit the route (see page 87).
—
or
—
To save and immediately follow the built route:
Press FOLLOW QUICK RTE. The route is saved under the name ‘Quick Route’.
If a Quick Route already exists it is overwritten. The system then initiates a
follow route.
Note:
If you want to keep the Quick Route, you will need to rename it. See “Changing the
Name or Color of a Route or Track“ on page 93.
... using existing waypoints
You can use waypoints that already exist to build a new route.
6.0nm North-Up (Relative Motion)
Csr Pos N 50°48.914 W 001°31.743
252°T
26.74nm
D9846-1
WPT 0003
WPT 0004
WPT 0002
WPT 0001
USE WPT
LIST
PLACE
WAYPOINT
FOLLOW
QUICK RTE
SAVE
ROUTE...
PLACE
WAYPOINT
USE WPT
LIST
PLACE
WAYPOINT
FOLLOW
QUICK RTE
SAVE
ROUTE...
PLACE
WAYPOINT
D9847-1
ROUTES.
..
NEW ROUTE
USE THIS
WAYPOINT
81295.book Page 79 Wednesday, December 20, 2006 2:48 PM