Filter
Top Products
46 A60 Dual Function Display
Note:
The save can take as long as one minute to complete. This is because a 1MB
file is always saved to the card, despite the number of waypoints, routes and tracks
you are saving.
When the save is complete, a new message box appears. You can view the
contents of the CF card with the User Card Manager. You should see a 1MB file
named ‘ARCHIVE.FSH.’
Note:
To save the current image to a card, see “Save Image to User Card...“ on page 41.
Retrieve Information from a CompactFlash Card
1. Insert a CF card into the card slot. See “Inserting and Removing the Compact-
Flash Card” on page 42.
2. Press the DATA key. The Data soft keys are displayed.
3. Select LOAD WPTS/RTES FROM CARD. A new set of soft keys appear.
4. Press the SEL LIST soft key until the desired data item is highlighted: WPT, RT,
or TRK. The associated list is displayed.
5. To load or delete all items in the list (waypoints, routes, or tracks) from the
card, press LOAD ALL or DELETE ALL, respectively.
6. To load or delete a specific item from the card, use the trackpad to highlight
that item in the list and press LOAD or DELETE the appropriate WPT, RT, or
TRK.
A message box appears to show when the load is complete. The new items
appear on your chart.
Sending and Receiving Information using NMEA
You can transfer and retrieve waypoints and tracks to and from another
instrument or PC.
➤ To send or receive waypoints or tracks using NMEA:
1. Press the DATA key.
2. Press TRANSFER ON NMEA. The NMEA soft keys are displayed.
D9813-1
CRSR INFO
ON TIME OFF
TRANSFER
ON NMEA...
LOAD WPTS
FROM CARD...
SAVE WPTS
TO CARD...
D9816-1
LOAD ALL
SEL LIST
WPT RT TRK
LOAD
WAYPOINT
DELETE ALL
DELETE
WAYPOINT
81295.book Page 46 Wednesday, December 20, 2006 2:48 PM