Filter
Top Products
26 A60 Dual Function Display
Database Lists
Database lists contain information that have been added to the display memory,
such as lists provided for waypoints, tracks and routes. You can scroll through a
database list using the trackpad to highlight a particular entry. Entries within a
database list can be selected for editing (for example, erase or edit the name of a
waypoint).
2.5 Setting up the Display
You can set up the display so that the applications being used are presented in the
way that suits how you work. This section shows you how to access and change
these settings.
Note:
All non-sounder setting changes (except Brightness and Relative Motion) are re-
tained when the unit is powered off using the PWR key. However, there is a one-minute de-
lay from the time you make the setting change to when the A60 places it in memory. If
power is removed from the unit without using the PWR key less than one minute after mak-
ing a change, the setting is lost.
To access and edit the Setup menu:
1. Press
MENU. The Setup menu is displayed.
The Setup Menu is contains the following sub-menus:
• Chart Setup
• Fishfinder Setup. For details please refer to the DSM25 Handbook.
• System Setup
• Alarms Setup
•GPS Status
• Display Setup
• System Diagnostics
D9795-1
Setup
Setup
Chart Setup...
Fishfinder Setup...
System Setup...
Alarms Setup...
GPS Status...
Display Setup...
Diagnostics Menu...
User Card Menu...
81295.book Page 26 Wednesday, December 20, 2006 2:48 PM