Filter
Top Products
90
Chapter 6
Operating Your Navigation System with Voice
of available voice commands (Voice Help menu).
Display of the Voice Help menu can be turned on
/off with “Voice Recog.Help” in the Settings
menu.
➲ When you are used to voice operation fea-
tures and no longer need Voice Help, you can
turn it off ➞ Page 52
Scrolling through the Voice Help Menu
Scroll through the remaining commands using
the Scale Controller. You can also display the
commands by saying the words “Next Page” (or
“Previous Page”).
❒ If you want to listen to the message of the
Navigation System, say “Repeat”.
❒ If you want to return to the previous screen,
say “Back”.
To cancel voice operation
You can cancel voice operation features at any
time by pressing the TALK button downwards.
❒ If the system fails to recognize the command
you speak, press the TALK button or say
“Next option” and other operable commands
will be displayed. If you then press the TALK
button within 3 seconds, yet more commands
are shown. Repeat this until the command
you want to use is shown.
❒ If there are too many items to list, “1/**” is dis-
played.
❒ Depending on the operating state of the navi-
gation system, some commands displayed in
Voice Help may be unavailable.
❒ If no command is made in the next 6 seconds,
voice recognition is canceled and the Naviga-
tion System is on hold until the next opera-
tion. Press the TALK button to reactivate
voice operation.
Operating by only voice when the Navi-
gation System is started
Turning on “Auto Voice Recognition” in the
Settings menu allows all settings to be imple-
mented by voice from after the navigation system
is turned on and until the route is set (applies
only if the route is not yet set).
❒ If you press the TALK button downwards dur-
ing voice operation, voice operation mode is
canceled.
Voice Commands
Common commands
Next Page, Previous Page, Back, Repeat, Next
Option
Commands for display change
Displaying the navigation screen: Display NAVI-
GATION
Displaying the Audio screen: Display AV
Available voice commands
related to navigation
You can say the following commands:
❒ Give the following verbal commands after
switching to the navigation screen.
Specifying your destination
New Destination, Address Book, Return Home,
<Registered name>, <POI category name>
❒ For the Address Book, <Registered name>,
and <POI category name>, only the com-
mands displayed in Voice Help can be used.
❒ When you input a telephone number by voice,
only numbers in data can be recognized.
❒ You cannot search for telephone numbers of
registered locations.
When voice command is possible
When voice command is not accepted
Voice Help Current page