Filter
Top Products
22
Chapter 1
Basic Operation
8 Input the destination town or area.
If the list screen is displayed, proceed to step
9.
9 Select the city or area where your destina-
tion is located. Click the OK button.
Route calculation starts. When the route cal-
culation is completed, the map of your sur-
roundings appears. (The route is displayed
highlighted.)
❒ If the selected street is very long and
passes through several cities or areas, the
screen for entering the name of the city or
area appears.
If you did not input the house number in Step 5,
the house number input screen comes up after
the “Street” and “City” are determined. You
should now input the house number (perform
Step 5).
❒ If there is more than one place for the house
number input, or if there is no such house
number in that place, displays a list of a cer-
tain range. To start the route calculation,
select the range within the list you wish to
specify as the destination and click the OK
button.
❒ You can also see the destination on the
map by selecting on the right of the
list.
➲ Searching the destination by map ➞
Page 28
❒ If you press the NAVI button during route
calculation, the calculation is canceled
and the map display appears.
❒ When performing a destination search
with the route already set, select whether
to regard the specified area as your desti-
nation and search for a new route, or
search for a route via that area.
➲ Adding way points to the route ➞ Page 37
➲ Once searched for, a location is automati-
cally stored in the “Destination History”
➞ Page 40
10Drive in accordance with the screen and
voice information.
Your Navigation System gives you the follow-
ing information with the timing adjusted to
the speed of your vehicle :
• Distance to the next turning point
• Direction of travel
• Road number of the freeway
• Way point (If this is set)
• Your destination
➲ How to view the screen ➞ Page 25
➲ Searching for another route ➞ Page 36
➲ Canceling route guidance ➞ Page 36
❒ Pressing the remote control’s GUIDE button
allows you to hear the information again.
❒ If you deviate from the route with the Guid-
ance set to Route View or Guide View and
enter a street not recorded on the disc, the
screen changes to Map View. When you
return to the route, returns to the original
mode and resumes route guidance.
❒ If you stop at a gas station or a restaurant dur-
ing the route guidance, your Navigation Sys-
tem remembers your destination and route
Information. When you start the engine and
get back on the road, the route guidance
resumes.
Onscreen items you can select
The status of the items appearing on the screen
is indicated by their color.
Depending on the function the navigation is per-
forming, you can select some items, while other
items are not available.
Blue item:
The item is operable.
Dark gray item:
The function is not available (e.g., operation is
prohibited while driving).