Filter
Top Products
66
Chapter 5
Combining and Using Pioneer AV Equipment
1 Select the repeat range.
➲ Refer to “Repeating play” on page 65.
2 Press 5 or ∞ to select “RANDOM” from
the MULTI-CD MENU, and press the
A.MENU (AUDIO) button.
3 Press 5 to turn random play on.
Tracks will play in a random order within the
previously selected “MAGAZINE” (multi-CD
player repeat) or “DISC” (disc repeat) ranges.
4 Press ∞ to turn random play off.
Tracks will continue to play in order.
Scanning CDs and tracks
While you are using “DISC” (disc repeat), the
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
“MAGAZINE” (multi-CD player repeat), the
beginning of the first track of each disc is played
for about 10 seconds.
1 Select the repeat range.
➲ Refer to “Repeating play” on page 65.
2 Press 5 or ∞ to select “SCAN” from the
MULTI-CD MENU, and press the A.MENU
(AUDIO) button.
3 Press 5 to turn scan play on.
The first 10 seconds of each track of the
present disc (or the first track of each disc) is
played.
4 When you find the desired track (or disc)
press ∞ to turn scan play off.
The track (or disc) will continue to play.
❒ If the display has automatically returned to
the playback display, select “SCAN” again by
pressing the A.MENU (AUDIO) button.
Playing back from the track list
When playing CD TEXT discs, you can select and
playback tracks from the title’s displayed track
list.
❒ This function is available only when a CD TEXT
disc is played with a Multi-CD Player with the
CD TEXT disc playback function.
1 Press 5 or ∞ to select “TRACK LIST”
from the MULTI-CD MENU, and press the
A.MENU (AUDIO) button.
2 Press 5 or ∞ to select the track you want
to play in the list, and press the A.MENU
(AUDIO) button.
Playback of the selected track begins. After
that, tracks play in order.
❒ Up to six tracks in the list can be displayed at
once. Press 2
or
3 to display previous or
next list. When the first or sixth track is indi-
cated in the displayed list, pressing 5 or ∞
takes you to the previous or next page.
❒ Titles of up to 10 characters can be displayed.
❒ Display of some characters may not be possi-
ble.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press 5 or ∞ to select “PAUSE” from the
MULTI-CD MENU, and press the A.MENU
(AUDIO) button.
2 Press 5 to turn pause on.
Play of the current track pauses.
3 Press ∞ to turn pause off.
Play will resume at the same point that you
turned pause on.
Using compression and bass
emphasis
You can use these functions only with a multi-CD
player that supports them.
Using COMP (compression) and DBE (dynamic
bass emphasis) functions let you adjust the
sound playback quality of the multi-CD player.
Each of the functions have a two-step adjust-
ment. The COMP function balances the output of
louder and softer sounds at higher volumes. DBE
boosts bass levels to give playback a fuller sound.
Listen to each of the effects as you select through
them and use the one that best enhances the
playback of the track or CD that you are listening
to.