Filter
Top Products
81
Chapter 5 Combining and Using Pioneer AV Equipment
❒ When selecting the FM tuner as the source,
you cannot switch to “SLA”.
❒ Select “BACK” in the menu display or press
the BACK/FUNC button to return to the pre-
vious display.
❒ To cancel the menu, press the BAND/ESC
button.
❒ When the setting is “REAR SPEAKER:SUB-
WOOFER”, “FADER/BALANCE” indications
are for “BALANCE”.
❒ If you do not operate the audio function within
about 30 seconds, the menu is automatically
canceled.
Setting the sound focus equal-
izer
Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be obtained
if seating positions are chosen carefully.
❒ “FRONT1” boosts the treble on the front out-
put and the bass on the rear output.
❒ “FRONT2” boosts the treble and the bass on
the front output and the bass on the rear out-
put. (The bass boost is the same for both front
and rear.)
For both “FRONT1” and “FRONT2” the H set-
ting provides a more pronounced effect than the
L setting.
1 Press the SFEQ button on Pioneer AV
Head Unit (AVH-P6400CD or AVH-P6400)
to select the desired SFEQ mode.
FRONT1-H — FRONT 1-L — FRONT 2-H
— FRONT2-L — CUSTOM — OFF
2 Press 2 or 3 to select the desired posi-
tion.
LEFT — CENTER — RIGHT
❒ If you adjust the bass or treble, “CUSTOM”
memorizes an SFEQ mode in which the bass
and treble are adjusted for personal prefer-
ence.
❒ If you switch the SFEQ mode, the HPF
(HIGH PASS FILTER) function is auto-
matically switched off. By switching the
HPF (HIGH PASS FILTER) function on
after selecting the SFEQ mode, you can
combine the HPF (HIGH PASS FILTER)
function with SFEQ function.
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press 5 or ∞ to select “AUDIO” from the
MENU, and press the A.MENU (AUDIO)
button.
2 Press 5 or ∞ to select “FADER/BALANCE
(or “BALANCE”)”, and press the A.MENU
(AUDIO) button.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
❒ “FRONT:15” — “REAR:15” is displayed
as the front/rear speaker balance moves
from front to rear.
❒ “FR:00” is the proper setting when only
two speakers are used.
❒ When the rear output setting is “REAR
SPEAKER:SUBWOOFER”, you cannot
adjust front/rear speaker balance. (Refer to
“Setting the rear output and subwoofer
controller” on page 85.)
3 Press 2 or 3 to adjust left/right speaker
balance.
Each press of 2 or 3 moves the left/right
speaker balance towards the left or the right.
❒ “LEFT:9” — “RIGHT:9” is displayed as
the left/right speaker balance moves from
left to right.
Center of acoustic field