Pioneer CNDV-40R Automobile Accessories User Manual


 
50
Chapter 4
Customizing Your Navigation System
Major Ordinary Road
When the “KM Mile Setting” is set to
Mile” or “Mile & Yard”, it can be set in 5
mile increments from 10 miles to 120 miles
(45 miles*).
When the “KM Mile Setting” is set to
km”, it can be set in 5 km increments
from 20 km to 150 km (70 km*).
Freeway
When the “KM Mile Setting” is set to
Mile” or “Mile & Yard”, it can be set in 5
mile increments from 30 miles to 120 miles
(60 miles*).
When the “KM Mile Setting” is set to
km”, it can be set in 5 km increments
from 60 km to 150 km (85 km*).
Modify Current Location
Move the joystick to adjust the current position
and direction of the vehicle displayed on the
map. Operate by following the messages dis-
played on the screen.
Hardware Volume
The sound volume for the navigation can be set.
You can separately set the volume of the route
guidance and of the beep sound.
You can change the value by selecting “+” or “
and clicking the OK button.
Demo Mode
This is a demonstration function for shops. After
a route is set, the simulation of the route guid-
ance to a destination is automatically displayed.
Normally, set this to “Off”.
On (Repeat):
Repeat demo drive.
Off*:
Demo Mode is set off.
Day/Night Display
To improve the visibility of the map during the
evening, you can change the combination of the
colors of the map.
Nighttime*:
You can change the combination of the colors of
a map according to whether the vehicle lights are
On or Off.
Daytime:
The map is always displayed with bright colors.
Map Display
Screen display-related items can be set.
Tracking Display
The tracking display setting has the following
options.
Always:
Displays tracking for all journeys.
This Trip:
Displays tracking dots but erases them when the
navigation system is turned off (when turning off
the engine of your vehicle or turning the ignition
switch to ACC OFF).
Off*:
Does not display tracking dots.
Travel Time Display
It is possible to display the estimated time of
arrival or the estimated traveling time from your
current location to your destination.
Travel Time*:
Displays travel time to your destination.
ETA:
Displays the estimated time of arrival.
Off:
Neither travel time nor arrival time is shown.
AV Guide Mode
Setting whether or not to switch to the navigation
screen automatically when your vehicle
approaches a guidance point such as an inter-
section while displaying a screen other than navi-
gation.
On*:
Switching from audio operation screen to naviga-
tion screen.
Off:
Screen is not switched.
You can only use this function when the AVH-
P6400CD or AVH-P6400 is connected.