Filter
Top Products
23
■
Terminology
Before moving on, take a few minutes to read the following information about the conven-
tions used in this manual. Familiarity with these conventions will help you greatly as you
learn how to use your new equipment.
• Buttons on your Remote Control are referred to as: NAVI button, MENU button.
• Items in various menus are referred to like this: “New Destination” and “Settings”.
• Extra information, alternative use and other notes are presented like this:
➲ After removing the disc from the slot, keep it in the case.
■
For “AVIC-9DVD” users
This manual describes the operation based on the Remote Control “CD-R11”. If you use
“AVIC-9DVD”, some button names of the Remote Control may be different from this manual.
If you use AVIC-9DVD, check the operation of your Remote Control by referring to
“Dipswitch settings for AVIC-9DVD” and “About the difference in the operation of the
Remote Control” below.
■
Dipswitch settings for AVIC-9DVD
Set the dipswitches as following.
■
About the difference in the operation of the Remote Control
If the Remote Control included with AVIC-9DVD is used, there will be the following changes
in operation:
Using PGM Function
You can use the PGM Function. However, even if the Operation mode switch is set to
“DVD”, you cannot turn the DVD power On/Off.
Starting voice operation
Press the joystick while the Operation mode switch is set to “NAVI”. (It is canceled if the
mode is set to “DVD”.)
Switching screen display (display of frequency, etc.)
You cannot do this with the Remote Control included with the AVIC-9DVD. If the AV Head
Unit is combined, you can do this with the AV Head Unit.
Playing the Built-in DVD player
Press the control stick while the Operation mode switch is set to “DVD”.
ON
ON
1234
OFF
Switch 1: ON
Switch 2: ON
Switch 3: OFF
Switch 4: ON or OFF