Filter
Top Products
103
Chapter 6
Combining and Using Pioneer AV Equipment
Basic Operation When Pioneer AV Equipment Is Com-
bined
This section describes how to switch the source and screen. In addition, a basic operational flow
for each source is also described. The operation method for each source is almost the same as
the basic operational flow described in this section. So study this first.
■Switching the source
How to switch the source, and how to switch the map screen of the Navigation System and
audio equipment screen are described.
1 Press the SOURCE button and switch to the source you want to operate.
As you press the SOURCE button, the source is switched and the information plate of
each source appears.
Press SOURCE button repeatedly to switch between the following sources:
CD player (AVH-P6400CD) - TV - VIDEO - Tuner - XM tuner - DAB (Digital Audio
Broadcasting) - DVD (one disc only/multi-DVD player) - Multi-CD player - External
unit 1 - External unit 2 - AUX - NAVI
Depending on the equipment connected, the source you can select differs.
➲ When the power of AV equipment is off, or a disc is not set, you may not be able to
select the source. In such a case, turn the power of the AV equipment on and insert a
disc before switching the source.
2 Adjust the volume using the VOL dial.
In the following cases, the sound source will not change:
➲ When a product corresponding to each source is not connected to AV Head Unit.
➲ When no disc is set in AV Head Unit.
➲ When no disc is set in the CD player.
➲ When no magazine is set in the multi-CD player.
➲ When no magazine is set in the multi-DVD player.
➲ When the AUX (auxiliary input) is set to off.
➲ When no disc is set in the DVD player (e.g, SDV-P7).
➲ When the VIDEO SETTING is set to off.
Navigation source
When DVD or CD is played with a DVD player installed in the main unit, the source
will be set to “NAVI” source.
➲ In case of using the built-in DVD player of AVIC-9DVD, see the “Operation manual”
of AVIC-9DVD.
➲ In case of using the built-in DVD player of AVIC-90DVD, see “Hardware manual” of
AVIC-90DVD.
➲ You cannot play DVD-Video and CD with the built-in DVD-ROM drive of AVIC-
80DVD.