Filter
Top Products
134
Slow Motion Playback
This lets you slow down playback speed.
1 Press EE
EE
(GUIDE) button for 1 second during playback.
To return to normal playback, move the control stick up.
➲ There is no sound during Still, Frame-by-Frame or Slow Motion playback.
➲ Depending on the disc and the playback location on the disc, the prohibited mark “ ”
may be displayed indicating that Still, Frame-by-Frame and Slow Motion playback are not
possible.
➲ With some discs, images may be unclear during Frame-by-Frame and Slow Motion play-
back.
➲ Reverse Frame-by-Frame playback and Reverse Slow Motion playback are possible, only
connecting the XDV-P9 or XDV-P90 by the e (CANCEL ROUTE) button.
■Operating using Information Display 1
Specify Title, Chapter or Time to search for a desired scene and play it back.
1 Push the joystick left/right to select Title or Chapter (or Track) in Information Display
1.
The selected item is indicated in green.
2 Push the joystick up/down to indicate the desired number.
3 Press the joystick directly down to complete selection.
➲ You can also specify a Title, Chapter or Time directly without using an Information Display.
(Refer to page 132).
➲ With discs that feature menus, you can press MENU button to select for display of menu
indications.
➲ Some discs may feature a prohibited mark, indicating that display of Title and Chapter indi-
cations is not possible.
➲ You cannot specify a Chapter when in the Stop mode.
➲ If you perform no operation for about eight seconds, the specified number becomes
invalid.
Specifying time
You can specify a time from which playback starts. (Time search)
1 Push the joystick left/right to select Time in Information Display 1.
The selected item is indicated in green.
2 Input the desired time with the numeric keypad.
Examples:
10 minutes 09 seconds: press 1, 0, 0, and 9 in order.
78 min 00 sec: press 7, 8, 0 and 0 in order.
Press CLEAR button to delete input numbers.
3 Press the joystick directly down to complete selection.
➲ Some discs may feature a prohibited mark, indicating that display of Title and Chapter indi-
cations is not possible.
➲ You cannot specify a Time in the Stop mode.
➲ If you perform no operation for about eight seconds, the specified number becomes
invalid.