Filter
Top Products
To install the slide mount...
· Place the slide mount into the metal bracket. You may need to pull
both sides of the metal bracket apart slightly to allow room for the slide
mount.
· Secure the assembly with the supplied washers and knobs. Make
certain the teeth of the bracket and slide mount are meshed.
To change the slide mount angle...
· Loosen the two knobs at least 2 or 3 turns.
· Rotate the slide mount to the desired angle.
· Re-tighten the knobs.
14.7 SLIDE MOUNT OPERATION (OPTIONAL)
The slide mount has been designed for easy insertion and removal of your
GPS 100 if you wish to use the unit in another boat/vehicle, plan at home,
or prevent theft.
When placing the GPS 100 into the slide mount, you may leave the battery
pack installed or remove it for separate storage. If you leave the battery pack
14-7