Garmin GPS 100AVD GPS Receiver User Manual


 
4-10
· Place the cursor over the waypoint name on line 1 and press the left
arrow key to scroll up the list.
Remember the waypoint review feature will allow you to quickly scan the
definition of a nearest waypoint by pressing the ENT key with the cursor over
the desired waypoint.
4.8 PROXIMITY ALARM WAYPOINTS
Name Alarm Distance Total Proximity Waypoints
PROXIMITY WAYPOINT PAGE
The Proximity Waypoint Page allows you to define an alarm circle around a
waypoint. Boaters may wish to define a proximity alarm waypoint around a
rock or sand bar. Pilots may wish to define a proximity alarm waypoint around
a restricted use airspace such as a MOA or TCA. The GPS 100 will notify
you with an alarm tone and the message “PROX ALARM-PRESS NAV” if you
enter the alarm circle. After you view this message, press the NAV key. The
Position Page will display the range and bearing from the proximity waypoint
to your position. (See Section 5.2 for information on the Position Page.)
The GPS 100 allows you to define up to 9 proximity waypoints. The Proximity
Waypoint Page displays 3 proximity waypoints at a time. Additional waypoints
are viewed by scrolling through the proximity waypoint list. The number of
proximity waypoints is displayed in the upper right corner of the page.
To scroll through the proximity waypoints...
· Place the cursor over the alarm distance on line 3 and press the right
arrow key to scroll down the list.
· Place the cursor over the waypoint name on line 1 and press the left
arrow key to scroll up the list.