Filter
Top Products
· Place the cursor over line 1 and press the left arrow key to scroll up
the list.
To select the desired waypoint...
· Place the cursor over the desired waypoint and press the ENT key.
The Waypoint Definition Page of the selected waypoint will be
displayed.
· Press the ENT key over “OK?” on the Waypoint Definition Page to
approve the waypoint.
· Press the CLR key over “OK?” on the Waypoint Definition Page to
reject the waypoint and return to the Duplicate Waypoint Page.
Duplicate waypoints typically occur for waypoints in different regions. If you
are operating only in a specific region (e.g., U.S.A, Europe, etc.), you may
wish to minimize occurrences of duplicate waypoints by selecting the
database region accordingly (see Section 11.7 for more information on
database region selection).
4.4 USING WAYPOINTS BY SCANNING
WAYPOINT SCAN PAGE
The GPS 100 offers a waypoint scanning feature which will simplify waypoint
name entry. A waypoint list for each of the five waypoint types is available
for scanning in any waypoint name field. Each list consists of up to nine
nearest waypoints within 200 nm and a complete list of waypoints which are
organized alphabetically (numbers are ordered before the letters of the
alphabet). The nearest waypoint list is placed in front of the complete list so
that, in the event of an emergency, you may quickly access the desired
nearest waypoint.
4-6