Filter
Top Products
11-12
To set the map datum...
· Move the cursor over the output format and press the CLR key to
select the desired map datum. You may select from AUSTRALIA,
EUROPE, GREAT BRITAIN, HAWAII, INDIA, IRELAND, NAD27
ALASKA, NAD27 CANADA, NAD27 USA, NAD83, NEW ZEALAND,
SOUTH AFRICA, SOUTH AMERICA, TOKYO, WGS72, and WGS84.
· Move the cursor over “OK?” and press the ENT key.
You may select the output data format of the GPS 100. “NMEA 0180”,
“NMEA 0182” and “NMEA 0183” are available for interfacing with other
marine electronic devices. The “AVIATION” format is used in aviation
installations. You may select “DOWNLOAD” to download your stored
waypoints and routes from the GPS 100 to a personal computer. Finally, you
may turn the output “OFF” if you do not use the interface (see Section 14.1
for more information on NMEA interfaces).
To select the GPS 100 output format...
· Move the cursor over the cyclic field to the right of “OUTPUT” and
press the CLR key to select the desired output format.
· Move the cursor over “OK?” and press the ENT key.
11.8 WAYPOINT/ROUTE TRANSFER
DATA TRANSFER PAGE
Waypoints and routes may be transferred from one GPS 100 to another, or
from a PC to a GPS 100. The Data Transfer Page allows you to select the
desired data transfer operation (receive waypoints/routes or transmit
waypoints/routes). Data transfer operations require an optional PC kit or
data transfer cable.
Number of Routes
Transmitted/Received
Number of Waypoints
Transmitted/Received
Transfer Select Field