Filter
Top Products
4.2 CREATING WAYPOINTS
NEW WAYPOINT PAGE
When a waypoint name has been entered that does not exist in memory, the
GPS 100 will assume you wish to create a new waypoint. The New Waypoint
Page will ask you to select one of three methods for defining the waypoint
position: direct latitude/longitude entry, relative to an existing waypoint, or
relative to your present position.
To enter the waypoint position directly...
· Place the cursor over “ENTER POSN?” and press the ENT key. The
Waypoint Definition Page will appear with the cursor over the waypoint
latitude as illustrated below.
· Enter the waypoint latitude.
· Enter the waypoint longitude.
· With the cursor over “OK?”, press the ENT key. The waypoint is now
stored in memory.
4-3