Filter
Top Products
4-5
4.3 USING WAYPOINTS
You may use waypoints on many GPS 100 pages. When a waypoint name
is entered, the Waypoint Definition Page will be displayed asking you to
confirm the position of the waypoint. For example, each time you enter a
waypoint into a route, the Waypoint Definition Page will be displayed.
To accept the waypoint definition...
· With the cursor over “OK?”, press the ENT key.
To reject the waypoint definition...
· With the cursor over “OK?”, press the CLR key.
Once a waypoint definition has been accepted or rejected, the previous page
will be displayed.
Some waypoints in the database may have the same name. When you have
entered a waypoint whose name is not unique, the Duplicate Waypoint Page
will be displayed for you to select the desired waypoint:
Total Number
Index Waypoint Type Region of Duplicates
Waypoint
Identifier
DUPLICATE WAYPOINT PAGE
The waypoint name and number of duplicates are displayed on the right side
of the page. Waypoint type and region of 3 duplicate waypoints are displayed
sorted by distance from present position. Additional waypoints are viewed
by scrolling through the list.
To scroll through the duplicate waypoints...
· Place the cursor over line 3 and press the right arrow key to scroll
down the list.