Filter
Top Products
To create a waypoint offset from a reference waypoint...
· Move the cursor over “REF WPT?” and press the ENT key. The
Waypoint Definition Page will appear with the cursor over the reference
waypoint name as illustrated below.
· Enter the name of the reference waypoint. The position of the
reference waypoint will be displayed on line 2.
· Enter the bearing from the reference waypoint to the new waypoint.
· Enter the distance from the reference waypoint to the new waypoint.
The resulting waypoint position will be displayed on line 2.
· With the cursor over “OK?”, press the ENT key. The waypoint is now
stored in memory.
To create a waypoint offset from your position...
· Move the cursor over “RELATIVE TO PRES POSN?” and press the
ENT key. The Waypoint Definition Page will appear with the cursor
over the bearing and your position will be displayed on line 2 as
illustrated below.
· Enter the bearing from your present position to the new waypoint.
· Enter the range from your present position to the new waypoint. The
resulting waypoint position will be displayed on line 2.
· With the cursor over “OK?”, press the ENT key. The waypoint is now
stored in memory.
4-4