Filter
Top Products
Setting the Timers
To open the Timers tab, press MENU twice, select Setup from the
vertical tab list, and Timers from the row of tabs along the top.
Timers Tab of the Setup Tab
User—allows you to set the timer to Count Up or Count Down.
You can also Reset the timer and turn it Off. Enter a time to use
when counting up or down to the right.
Marine—displayed on the Compass page. See page 49.
Since Midnight—the time the unit has been turned on since
midnight. This will reset if you restore All Unit Defaults from the
System tab.
Changing the Time
The Time tab allows you to set the time format and zone. You can
also set the unit to conform to Daylight Saving Time. The current
time and date are displayed at the bottom of the page.
To open the Time tab, press
MENU twice, select Setup from the
vertical tab list, and Time from the row of tabs along the top.
Time Tab of the Setup Tab
Time Zone—allows you to choose a city in your correct time zone
so the GPSMAP 276C will show the correct local time. Select
Other to enter a UTC Offset.
If the incorrect date is displayed, press MENU, highlight Set Date,
and press ENTER. You will then be prompted to enter the current
year. The GPSMAP 276C will use this information when gathering
satellite data to display the correct date.
GPSMAP 276C Owner’s Manual 83
CUSTOMIZING YOUR GPSMAP 276C > SETTING UP THE SYSTEM