Filter
Top Products
Editing a Waypoint
The User Points tab displays a master list of all waypoints currently
stored in memory. From the User list, you may review, edit, rename,
or delete individual waypoints or delete all user waypoints.
User Points Tab
The total number of stored and available waypoints is displayed
at the bottom of the User Points tab, with the stored waypoints
arranged in numerical/alphabetical order.
To activate a Go To from the User Points tab:
1. Press MENU twice to open the Main Menu.
2. Select Points from the Main Menu, then highlight User.
3. Highlight the desired waypoint in the list.
4. Press NAV to open the Navigate Menu. Highlight Go To
<Point Name> and press ENTER.
To edit the waypoint:
1. Open the Waypoint Review or Waypoint Edit page.
2. Highlight the waypoint name, symbol, or another field you
want to change, and press ENTER.
Waypoint Page
Name fieldSymbol field
3. Use the Rocker key to select the desired symbol or enter
data and press ENTER when done.
To edit the next waypoint in the list:
1. After you have edited the waypoint on the Waypoint Edit
page (shown above), highlight Next and press ENTER.
2. The Waypoint list is displayed with the next waypoint
highlighted. Press ENTER to edit that waypoint.
32 GPSMAP 276C Owner’s Manual
BASIC OPERATION IN MARINE MODE > CREATING AND USING WAYPOINTS