Filter
Top Products
Creating Waypoints Using the Map
You can quickly create a waypoint using the Map page. When you
pan the map and move the arrow over a map item, you will see a
highlighted description of that item. The GPSMAP 276C uses the
map item text shown on the map as the default name and symbol for
the new waypoint.
To create a new waypoint using the Map page:
1. Press PAGE until the Map page is displayed.
2. Use the Rocker key to move the arrow to the desired map
position or map feature.
3. Press and quickly release ENTER/MARK to capture the
arrow position. Pressing and holding ENTER/MARK marks
your present position, not the arrow’s location.
If you have highlighted a map feature, an information page
appears after you press ENTER. Use the Rocker key to
highlight Save and press ENTER to save the item as a
waypoint.
Map Feature Information Page
Select Save to save feature as a waypoint
4. The New Map Waypoint page appears. To accept the
waypoint with the default information, highlight OK and press
ENTER.
To change the any information on the New Map Waypoint
page, highlight the appropriate field and press ENTER. After
entering your changes, highlight OK and press ENTER.
GPSMAP 276C Owner’s Manual 27
BASIC OPERATION IN MARINE MODE > CREATING AND USING WAYPOINTS