Filter
Top Products
Trip Computer Page
The Trip Computer page displays important data while navigating a
route in Automotive Mode. It indicates your current speed and other
helpful data about your trip, such as average speed and moving time.
Trip Computer Page
Reset the Trip Computer before beginning a trip. If you make
frequent stops, leave the GPSMAP 276C powered on in order to
receive satellites. This allows the unit to accurately measure elapsed
time during the trip.
Trip Computer Page Options Menu
The following options are available from the Trip Computer options
menu. Some options are only available if you have changed the
page layout. Press MENU to open the options menu. Highlight the
desired option and press ENTER.
Trip Computer Page Options Menu
Set Up Page Layout—allows you to choose the layout and number
of data fields. You can change the layout of the Trip Computer to the
Position Data Page layout while still in Automotive Mode. You can
also then change the data fields on the Position Data Page to be more
useful while in Automotive Mode.
Change Nearest Type
—allows you to specify the type of item to be
used as the nearest item (displayed in the lower-left data field of the
Position Data (2 Columns) layout). The choices change based upon
the Usage Mode you are currently using.
Select the Reset options to reset the maximum speed, the odometer,
everything but the max speed and odometer, or reset everything in
the trip computer.
GPSMAP 276C Owner’s Manual 67
AUTOMOTIVE MODE PAGES AND FEATURES > TRIP COMPUTER PAGE