Filter
Top Products
Now we will simulate navigation in the Automotive Mode. To
switch between Marine and Automotive Mode, press and hold the
PAGE key. Use the Rocker key to select Automotive and press
ENTER.
To find a land destination:
1. Be sure the GPSMAP 276C is set to Simulator Mode (see
“Activating Simulator Mode”).
2. Press the FIND key.
3. Highlight Cities and press ENTER.
4. Use the Rocker key to select a nearby city and press
ENTER. For our example, we selected National City, CA.
5. With Go To highlighted, press ENTER.
Simulated navigation displayed on the Map Page (Automotive Mode)
To simulate navigation to the Automotive destination:
1. Follow the previous steps to find a destination city. The
GPSMAP 276C switches to the Map page. A magenta line
shows the turn-by-turn route from your current location to
your destination.
2. The GPSMAP 276C automatically adjusts your speed to
“move” you along your route. Observe the movement of the
position marker (triangle) as the unit simulates navigation. If
desired, press IN or OUT to zoom.
3. If desired, press PAGE or QUIT to view the simulated
navigation on the other main pages.
Simulated Current Route Page (Automotive Mode)
When you are ready to navigate on your own, turn the Simulator off.
TIP: You can activate and deactivate the Simulator through the
Setup tab or GPS tab options menu of the Main Menu.
GPSMAP 276C Owner’s Manual 13
GETTING STARTED > SIMULATED BASIC NAVIGATION