Filter
Top Products
Additional Map Data Displayed
You can view the data that is currently loaded on your GPSMAP
276C unit and data card.
To review/change
map information:
1. Access the Map page and press MENU.
2. From the options menu, highlight Map Information and
press ENTER.
Data Card Information Page
Map Family
highlighted.
Press ENTER
to view the
individual maps
in the family.
3. The first page shows the Map Families stored on the data
card and unit and whether they are shown on the Map page.
To change the setting for a Map Family, highlight the box next
to the Map Family name and press ENTER to select (check
mark) or deselect (no check mark) the Show setting.
4. To view the list of maps within a Map Family, highlight the
name of the Map Family and press ENTER.
Individual Map Information Page
Showing the individual maps that are in the selected Map Family
5. To view detailed information about an individual map,
highlight the Map Name and press ENTER. Highlight OK and
press ENTER to exit the map information page.
6. To select/deselect individual maps for display on the Map
page, highlight the box next to the desired map and press
ENTER to check/uncheck the Show box. Or, press MENU,
select one of the options (Show All, Hide All, or Show
Defaults), and press ENTER.
7. Press QUIT to exit the Map Information page.
GPSMAP 276C Owner’s Manual 79
CUSTOMIZING YOUR GPSMAP 276C > SETTING UP THE SYSTEM