Filter
Top Products
To go to a highlighted map item:
1. Use the Rocker key to highlight the item you would like to
navigate to on the Map page.
2. Press NAV. Go To <point name> appears in the list of
options and is automatically highlighted. If you have selected
an area of the map that is not a map feature, Go To MAP
Point is listed. Select Go To <point name> or Go To MAP
Point and press ENTER.
Navigate Menu
with Map Feature highlighted
3. Follow the magenta route created on the Map page. Follow
the turn-by-turn route (auto-route) by using the Next Turns
page and Current Route page. If you are using the external
speaker, follow the voice prompts.
To activate new route using the Find Menu:
1. Press the NAV key to open the Navigate Menu.
2. Highlight New Route (or Go To Point when in Marine Mode)
and press ENTER to open the Find Menu.
3. From the Find Menu, highlight Waypoints and press ENTER.
(You may also choose to go to other points, such as Cities or
Tide Stations from this list. The steps vary only slightly from
those listed for Waypoints.)
4. Select a waypoint from the list then press ENTER to display
the Waypoint page.
Waypoint Review Page
Activating a Go To using the Find Menu
5. The Waypoint page automatically opens. With the Go To
button highlighted, press ENTER to begin navigation.
16 GPSMAP 276C Owner’s Manual
BASIC OPERATION IN MARINE MODE > NAVIGATING IN MARINE MODE