Filter
Top Products
69
Reference
Main Menu:
Tide Tab
To select the nearest tide station from you current location:
1. From the “Tide” tab, press MENU, then using the ARROW KEYPAD, highlight ‘Nearest Tide
Station’ and press ENTER/MARK.
The name of the closest station will appear in the ‘For’ fi eld. You must be within 100 miles of
a ‘tide station to use the ‘Nearest Tide Station’ option. If you are not within this range, you will see
a message “No Tide Stations For That Area.” Use the ‘Select From Map’ option and select a location
closer to a tide station.
To select a tide station from the map:
1. From the Tide tab, press MENU, then using the ARROW KEYPAD, highlight ‘Modify Station Opt’
and press ENTER/MARK. Highlight the ‘Tide Station’ fi eld and press ENTER/MARK.
2. Highlight ‘Select From Map’ from the bottom of the list and press ENTER/MARK.
3. Select a position on the map and press ENTER/MARK.
4. A list will appear showing up to nine of the nearest tide stations. Highlight the desired station
and press ENTER/MARK. If the “No Tide Stations For That Area” message appears, repeat steps
1-4 until you fi nd a station.
You may also change the date to view tide charts for another date.
To change the date for the tide chart:
1. From the Tide tab, press MENU, then using the ARROW KEYPAD, highlight ‘Modify Station Opt’
and press ENTER/MARK.
2. Highlight the ‘Date’ fi eld, press ENTER/MARK, and enter the desired date and press
ENTER/MARK.
To use the current date:
1. Press MENU, then highlight ‘Use Today’s Date’ and press ENTER/MARK.
If MapSource POIs or other MapSource products are loaded into the unit, the tides,
cities and marine navaids will be deleted from the system. Check the GARMIN web site
(www.garmin.com) for updates to reinstall the original factory-loaded data.
You may automatically search for the nearest station
and also view past and future tide information.
You must select a location within 100 nm of a tide station.
,
152 Manual Part 2.indd 69 11/27/2002, 2:56:45 PM