Filter
Top Products
26
Reference
Map Page Options/
Compass Page
Map Setup Menu Options
From the map setup page, you can access the following menu options:
• Restore Defaults — restores settings back to factory settings for the selection highlighted.
• Restore All Map Defaults — restores settings back to factory settings for all tabs.
To restore defaults for map settings:
1. From the Map tab in the Main Menu, highlight the tab or setup feature you want to restore settings
to and press MENU.
2. Highlight ‘Restore Defaults’ (highlight ‘Restore All Map Defaults’ if you want all tabs restored) and
press ENTER/MARK.
Compass Page
Whenever a NAV/MOB, Follow Track (TracBack) or Follow Route has been activated, the GPS
152’s Compass Page will guide you to your destination with digital readouts and a graphic compass
display, which includes a bearing pointer. Use this page (instead of the Highway Page) when travelling
at slower speeds, when making frequent directional changes, or where straight-line navigation is not
possible due to obstructions or terrain.
The middle of the page features a rotating ‘compass ring’ that shows your course over ground
(track) while you’re moving. Your present course over ground is indicated at the top of the compass
ring. A bearing pointer, in the middle of the compass ring, indicates the direction of the destination
(bearing) relative to the course over ground. The compass ring and pointer arrow work independently
to show—at a glance—the direction of your movement and the direction to your destination. For
instance, if the arrow points up, you are going directly to the waypoint. If the arrow points any
direction other than up, turn toward the arrow until it points up, then continue in that direction.
Map Setup Menu Options
Compass Ring
Data Fields
Current
Go To
Bearing Pointer
152 Manual Part 1.indd 26 11/27/2002, 2:55:55 PM