Garmin GPS 152 GPS Receiver User Manual


 
20
Reference
Creating Waypoints
with the Map Page Cursor
The cursor may also be used to create new waypoints directly from the map.
To create a waypoint with the cursor on a open map location:
1. Use the ARROW KEYPAD to move the cursor to the desired map position.
2. Press and quickly release the ENTER/MARK key to capture the cursor location (pressing and
holding the ENTER/MARK key will capture the current location, not the cursors location).
3. The New Map Waypoint window will appear. With OK highlighted, press ENTER/MARK to
con rm the new waypoint using the default three-digit name and symbol.
To create a waypoint with the cursor on a map item:
1. Use the ARROW KEYPAD to move the cursor and highlight the desired map feature.
2. Press the ENTER/MARK key to capture the cursor location. The Information page for that feature
will appear. Use the ARROW KEYPAD to highlight Create Waypt and press ENTER/MARK.
3. The New Waypoint window will appear. With OK highlighted, press ENTER/MARK to con rm the
new waypoint using the default name and symbol based on the map feature.
Selecting Map Scales
The map display has a range of 24 available scales from 120 ft. to 800 mi. (30 mt. to 1200 km).
The map scale is controlled by the IN and OUT keys, with the current scale displayed at the bottom
right of the data window.
To select a map scale:
1. Press the OUT key to zoom out and the IN key to zoom in.
The scale value represents the distance from one end of the scale bar to the other.
)
Creating a New Map Waypoint
Creating a New Waypoint from a Map Feature
152 Manual Part 1.indd 20 11/27/2002, 2:55:53 PM