Filter
Top Products
56
Reference
Main Menu:
Trip, Time and Pages Tabs
Trip Tab — Displays Trip Odometer, Moving Average speed, Total Average speed, Maximum Speed,
Stopped Time, Moving Time, Total Time, and Odometer.
To reset data in the Trip tab:
1. Press MENU, then highlight ‘Reset Trip’, ‘Reset Odometer’, ‘Reset Max Spd (speed)’, or ‘Reset All’
and press ENTER/MARK.
Time Tab — Displays the current time and date, allows you to select the 12 or 24 hour time format,
enter a time zone and adjust for daylight savings to show correct local time.
The following settings are available:
• Time Format — Choose from 12 or 24 hour (military) time format.
• Time Zone — Choose your correct time zone to show correct local time or enter a UTC Offset. The
UTC (also called Greenwich Time) offset is how many hours you are ahead or behind the time line.
See the table on page 72 for time offsets.
• Daylight Savings Time — Choose from ‘Auto’, ‘On’, or ‘Off’ to adjust for daylight savings.
Page Tab — Allows you to turn the display of the main pages on/off or ‘Jump To’ a particular page.
To select/deselect a main page:
1. Use the ARROW KEYPAD to highlight the box to the left of the page name. Pressing
ENTER/MARK will select/deselect that page. When a page is selected a ‘9
’ will appear in the box.
You must leave at least one page checked.
The following options are available by pressing MENU:
• Enable All Pages — Selects all pages.
• Basic Trackplotter — Selects Map page only.
• Nav Tools Only — Selects Compass, Highway, and Active Route pages only.
To ‘Jump To’ a specifi c page:
1. Use the ARROW KEYPAD to highlight the ‘Jump To’ option to the right of the desired page and
press ENTER/MARK.
Trip Tab
Time Tab
Selectable
Data Fields
Non-Selectable
Data Field
152 Manual Part 2.indd 56 11/27/2002, 2:56:34 PM