Filter
Top Products
1--2
62--11632
1.2 ENGINE SPECIFICATIONS
Table 1-2. Specification Chart
MODEL NUMBER 26--00128--00 26--00128--01 26--00128--02 26--00128--04 26--00128--05
TYPE Vertical, Water--cooled, 4 cycle diesel engine
NUMBER OFCYLINDERS 4
BOREXSTROKE mmXmm(in.Xin.) 83 X 102. 4 (3.27 X 4 .03)
TOTAL DISPLACEMENT cm
3
(cu.in.) 2216 (135.2)
BRAKE HORSEPOWER
SAE Intermittent HP kW (HP) / RPM
23.65 (31.7) /
1700
23.87 (32.0) /
1800
26.85 (36.0) /
2200
23.87 (32.0) /
1800
23.65 (31.7) /
1700
MAXIMUM SPEED RPM Below 2470
IDLING SPEED RPM 900
COMBUSTION CHAMBER Direct Injection
INJECTION PUMP Bosch “K” Type Mini Pump
GOVERNOR Mechanical Governor + Electronic Governor
INJECTION NOZZLE Bosch “P” Type Hole Nozzle
INJECTION TIMING (UNPRESSURIZED) 2.5° Before T.D.C.
4.0° Before
T.D.C.
2.5° Before T.D.C.
FIRING ORDER 1-- 3--4-- 2
INJECTION PRESSURE
(V alve Opening Pressure)
19.35 MPa (197.5 kgf/cm
2
, 2809 psi.)
COMPRESSION RATIO 21.5 : 1
LUBRICATION SYSTEM Forced Lubrication by P ump
OIL PRESSURE INDICATION Electrical Type Switch
LUBRICATION FILTER Full Flow Synthetic Media Filter (Cartridge Type)
COOLING SYSTEM Pressurized Radiator, Forced Circulation With Water Pump
STARTING SYSTEM
Electric S tarting With S tarting Motor
12V, 2.5 kW
STARTING SUPPORT DEVICE Intake Air Heater in Intake Manifold
FUEL Diesel Fuel No.2--D (ASTM D975)
LUBRICATING OIL *Quality Better Than C F Class (API), SAE 10W--30 or 15W--40
LUBRICATING OIL CAPACITY 14.2 L ( 15.0 U.S. Quarts)
Weight (DRY) kg ( lbs.) 199 (439)
*See paragraph 1.8.6