Filter
Top Products
4--3
62--11362
4.2 SERVICING
4.2.1 Thermostat Assembly
1. Thermostat Cover Bolt
2. Thermostat Cover
3. Thermostat Cover Gasket
4. Thermostat A ssembly
5. Thermostat Housing
1. Remove thethermostat cover mountingbolts (1), and
remove the thermostat cover (2).
2. Remove the thermostat assembly (4).
(When Reassembling)
Apply aliquid gasket only at the thermostat cover side o f
the thermostat cover gasket (3).
4.2.2 Water Pump Assembly
1. Water P ump Flange
2. Water P ump Shaft
3 Water Pump Body
4. Water P ump Gasket
5. Mechanical S eal
6. Impeller
1. Remove the fan belt.
2. Remove the water pump pulley.
3. Remove the water pump from the gear case as sem-
bly.
4. Remove the water pump flange (1).
5. Press out the water pump shaft (2) with the impeller
(6) on it.
6. Remove the impeller from the water pump shaft.
7. Remove the mechanical seal.
(When Reassembling)
Replace the mechanical seal with a new one.
Apply a liquid gasket to both sides of the gasket (4).