Filter
Top Products
2--12
62--11362
2.2.5 Oil Pan and Oil Strainer
(7)
1. Oil Pan Mounting Screw
2. Oil Pan
3. Oil Pan C over Gasket
4. Oil Pan C over
5. O--ring
6. Oil Strainer
7. Oil Pan Gasket
2.2.5.a Oil Pan and Oil Strainer
1. Remove the oil pan cover (4).
2. Remove the oil pan mounting bolts (1).
3. Remove the oil pan (2) by lightly tapping the rim of the
pan with a wooden hammer.
4. Remove the old gaskets (3) and (7).
5. Remove the oil strainer (6) and O--ring (5).
When Reassembling
Check to see that the oil filter strainer (6) is clean.
Visually checktheO--ring (5), applyengine oil andinstall
it to the pick--up tube.
Install the strainer (6) and O--ring (5).
Apply gasket sealant to the oil pan side of the oil pan
gasket (7) and fit the gasket to the oil pan (2).
Installtheoil pan(2) to theengine, andtightenthe o ilpan
mounting bolts (1) diagonally. Avoid uneven tightening
of the oil pan mounting bolts. (Refer to Section 1.5.2
To rque Specifications)
Apply gasket sealant to the oil pan cover side of the oil
pan cover gasket (3) and fit the gasket to the oil pan
cover (4).
Install the oil pan cover (4) to the oil pan (2).
Install and tighten the oil pan cover bolts diagonally.
Avoid uneven tightening of the oil pan cover mounting
bolts. (Refer to Section 1.5.2 Torque Specifications)