A SERVICE OF

logo

Section 5: Printer Configuration
SATO M10e Service Manual PN 9001113A Page 5-3
PRINTER SET UP
Print Mode Selection (DSW2-1): Selects between direct thermal printing on thermally sensitive
paper and thermal transfer printing using a ribbon.
Sensor Type Selection (DSW2-2): Selects between the use of a label gap or a reflective Eye-
Mark detector.
Head Check Selection (DSW2-3): When selected, the printer will check for head elements that
are electrically malfunctioning.
Hex Dump Selection (DSW2-4): Selects Hex Dump mode (see page 3-21).
DSW2-1 SETTING
Off Therm Xfr
On Direct Therm
DSW2
ON
OFF
12345678
DSW2-2 SETTING
Off Gap
On Eye-Mark
DSW2
ON
OFF
12345678
DSW2-3 SETTING
Off Disabled
On Enabled
DSW2
ON
OFF
12345678
DSW2-4 SETTING
Off Disabled
On Enabled
DSW2
ON
OFF
12345678