SATO M10e Service Manual PN: 9001113A Page 2-1
2
TECHNICAL DATA
All technical data deemed pertinent has been tabulated below for quick reference. Find the
relative section header and then locate the specific type of technical data in th left column.
PHYSICAL CHARACTERISTICS
Width 18.7 Inches (475 mm)
Height 12.6 Inches (320 mm)
Depth 12.3 Inches (314 mm)
Weight 50.7 Pounds (23 kg)
POWER
Input Voltage Autoswitching 100-240 VAC +/- 10%, 60 Hz
Power Consumption 560 Watt Operating, 40 Watt Idle
ENVIRONMENTAL
Operating Temperature 41° to 104°F (5° to 40°C)
Storage Temperature 23° to 140°F (-5° to 60°C)
Storage Humidity 30 to 90% RH Non-Condensing
Operating Humidity 30 to 80% RH Non-Condensing
Electrostatic Discharge
PRINT
Method Direct or Thermal Transfer
Speed (user selectable) 3 to 5 Inches Per Second (50 - 250 mm/s)
Print Module (dot size) .0033 Inches (.083 mm)
Resolution 305 Dots Per Inch (12 d/mm)
Maximum Print Width 10.5 Inches (266 mm)
Maximum Print Length 16.5 Inches (420 mm)
MEDIA
Minimum Width 5.16 Inches (131 mm)
Minimum Length 1.7 Inches (43 mm)
Maximum Width 11.8 Inches (300 mm)
Type Roll or Fan-Fold Die Cut, Thermally Sensitive for DT
