Filter
Top Products
3-18
SYNCHRONIZING THE THROTTLE BODIES/
ADJUSTING THE ENGINE IDLING SPEED
CHK
ADJ
NOTE:
9. Measure:
Sengine idling speed
Out of specification ! Adjust.
Make sure that the vacuum pressure is within
specification.
10. Stop the engine and remove the measuring
equipment.
11. Adjust:
Sthrottle cable free play
Refer to “ADJUSTING THE THROTTLE
CABLE FREE PLAY”.
Throttle cable free play
(at the flange of the throttle grip)
6 X 8 mm (0.24 X 0.31 in)
12. Remove:
Sdigital tachometer
Svacuum gauge
13. Install:
Sair filter case
Refer to “AIR FILTER CASE”.
Sfuel tank
Refer to “FUEL TANK”.
Srider seat
Refer to “SEATS”.
EAS00052
ADJUSTING THE ENGINE IDLING SPEED
Prior to adjusting the engine idling speed, the
throttle bodies synchronization should be ad-
justed properly, and the engine should have ad-
equate compression.
1. Start the engine and let it warm up for several
minutes.
2. Install:
Sdigital tachometer
(to the ignition of cylinder #1)
3. Check:
Sengine idling speed
Out of specification ! Adjust.
Engine idling speed
1,250 X 1,350 r/min