Filter
Top Products
4-52
FRONT FORK
CHAS
WARNING
CAUTION:
40 Nm (4.0 mSkg, 29 ftSlb)
NOTE:
Always use new copper washers.
Allow the damper rod assembly to slide
slowly down the inner tube
1
until it pro-
trudes from the bottom of the inner tube. Be
careful not to damage the inner tube.
2. Lubricate:
Sinner tube’s outer surface
Recommended lubricant
Suspension oil “01” or
equivalent
3. Tighten:
Sdamper rod assembly bolt
1
LOCTITE
While holding the damper rod assembly with the
damper rod holder
2
, tighten the damper rod
assembly bolt.
Damper rod holder
90890-01473
4. Install:
Souter tube bushing
1
(with the fork seal driver weight
2
and fork
seal driver attachment
3
)
Fork seal driver weight
90890-01367, YM-33963
Fork seal driver attachment
90890-01374, YM-8020-A