Filter
Top Products
5-52
CLUTCH
ENG
NOTE:
NOTE:
8 Nm (0.8 mSkg, 5.8 ftSlb)
NOTE:
NOTE:
5. Install:
Sfriction plates
Sclutch plates
First, install a clutch plate and then alternate be-
tween a friction plate and a friction plate.
a. Install the clutch plate and friction plate at fol-
lowing the illustrated.
Clutch plate
1
: t=2.3 mm (0.09 in)
Clutch plate
2
: t=2.0 mm (0.08 in)
Friction plate
3
: Color code/Purple
Friction plate
4
: Color code/Brown
6. Install:
Spressure plate
1
Align the punch mark
b
in the pressure plate
with the punch mark
a
in the clutch boss.
7. Install:
Sbearing
1
Spull rod
2
Spressure plate
3
Sclutch springs
Sclutch spring bolts
Tighten the clutch spring bolts in stages and in a
crisscross pattern.
8. Install:
Spull lever
In stall the pull lever with the “UP” mark facing
toward lower side.