Filter
Top Products
3-16
ADJUSTING THE VALVE CLEARANCE/
SYNCHRONIZING THE THROTTLE BODIES
CHK
ADJ
NOTE:
NOTE:
NOTE:
7. Install:
Sall removed parts
For installation, reverse the removal procedure.
SYNCHRONIZING THE THROTTLE BODIES
Prior to synchronizing the throttle bodies, the
valve clearance and the engine idling speed
should be properly adjusted and the ignition tim-
ing should be checked.
1. Stand the motorcycle on a level surface.
Place the motorcycle on a suitable stand.
2. Remove:
Srider seat
Refer to “SEATS”.
Sfuel tank
Refer to “FUEL TANK”.
Sair filter case
Refer to “AIR FILTER CASE”.
3. Remove:
Ssynchronizing hose
1
4. Install:
Svacuum gauge
1
(onto the synchronizing hose)
Sdigital tachometer
(near the spark plug)
Vacuum gauge
90890-03094, YU-08030