Filter
Top Products
5-33
STARTER CLUTCH AND GENERATOR
ENG
NOTE:
NOTE:
EAS00347
REMOVING THE GENERATOR
1. Remove:
Srider seat and fuel tank
Refer to “SEATS” and “FUEL TANK” in chap-
ter 3.
Sbuttom cowling
Sleft side cowling
Refer to “COWLINGS” in chapter 3.
2. Drain:
Scoolant
Refer to “CHANGING THE COOLANT” in
chapter 3.
Sengine oil
Refer to “CHANGING THE ENGINE OIL” in
chapter 3.
3. Remove:
Sgenerator rotor cover
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
4. Remove:
Sgenerator rotor bolt
1
Swasher
SWhile holding the generator rotor
2
with the
sheave holder
3
, loosen the generator rotor
bolt.
SDo not allow the sheave holder to touch the
projection on the generator rotor.
Sheave holder
90890-01701, YS-01880-A