Filter
Top Products
5-48
CLUTCH
ENG
NOTE:
NOTE:
EAS00276
REMOVING THE CLUTCH
1. Remove:
Sclutch cover
1
Sgasket
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern.
After all of the bolts are fully loosened, remove
them.
2. Remove:
Scompression spring bolts
1
Scompression springs
Spressure plate
2
Spull rod
3
Sfriction plates
Sclutch plates
3. Straighten the lock washer tab.
4. Loosen:
Sclutch bass nut
1
While holding the clutch boss
2
with the univer-
sal clutch holder, loosen the clutch boss nut.
Universal clutch holder
90890-04086, YM-91042
5. Remove:
Sclutch boss nut
1
Slock washer
2
Sclutch boss
3
Sthrust plate
4
EAS00280
CHECKING THE FRICTION PLATES
The following procedure applies to all of the fric-
tion plates.
1. Check:
Sfriction plate
Damage/wear ! Replace the friction plates
as a set.