Filter
Top Products
4-4
FRONT WHEEL AND BRAKE DISCS
CHAS
NOTE:
CAUTION:
NOTE:
3. Measure:
Sradial wheel runout
1
Slateral wheel runout
2
Over the specified limits ! Replace.
Radial wheel runout limit
1 mm (0.04 in)
Lateral wheel runout limit
0.5 mm (0.02 in)
4. Check:
Swheel bearings
Front wheel turns roughly or is loose ! Re-
place the wheel bearings.
Soil seals
Damage/wear ! Replace.
5. Replace:
Swheel bearings
New
Soil seals
New
a. Clean the outside of the front wheel hub.
b. Remove the oil seals
1
with a flat-head
screwdriver.
To prevent damaging the wheel, place a rag
2
between the screwdriver and the wheel surface.
c. Remove the wheel bearings
3
with a gener-
al bearing puller.
d. Install the new wheel bearings and oil seals
in the reverse order of disassembly.
Do not contact the wheel bearing inner race
1
or balls
2
. Contact should be made only
with the outer race
3
.
Use a socket
4
that matches the diameter of
the wheel bearing outer race and oil seal.