Filter
Top Products
8-40
SIGNALING SYSTEM
ELEC
YES NO
2. Fuel sender
SDrain the fuel from the fuel tank and remove
the fuel pump from the fuel tank.
SDisconnect the fuel sender coupler from the
wire harness.
SConnect the pocket tester (Ω 1) to the fuel
sender as shown.
Replace the fuel
pump assembly.
Positive tester probe ! green/white
Negative tester probe ! black
1
2
SCheck the fuel sender for continuity.
SIs the fuel sender OK?
YES NO
3. Voltage
SConnect the pocket tester (DC 20 V) to the
meter assembly coupler (wire harness side)
as shown.
The wiring circuit
from the main switch
to the meter assem-
bly coupler is faulty
and must be re-
paired.
Positive tester probe ! green/white
Negative tester probe ! black/white
1
2
STurn the main switch to “ON”.
SMeasure the voltage (DC 12 V) of
green/white and black/white at the
meter assembly coupler.
SIs the voltage within specification?
This circuit is OK.
1
2
YES NO
1. Multi-function meter LEDs
SCheck the multi-function meter LEDs for
continuity.
Refer to “CHECKING THE LEDs”.
SIs the multi-function meter LEDs OK?
Replace the meter
assembly.
EAS00806
7. The speedometer fails to operate.