Filter
Top Products
4-56
FRONT FORK
CHAS
WARNING
NOTE:
23 Nm (2.3 mSkg, 17 ftSlb)
26 Nm (2.6 mSkg, 19 ftSlb)
23 Nm (2.3 mSkg, 17 ftSlb)
e. Install the cap bolt and finger tighten it.
SBefore installing the cap bolt, apply grease
onto the O-ring.
SAlways use a new cap bolt O-ring.
f. Hold the cap bolt and tighten the nut to speci-
fication.
Nut
15 Nm (1.5 mSkg, 11 ftSlb)
EAS00662
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Install:
Shandlebar (temporarily)
2. Install:
Sfront fork leg
Temporarily tighten the upper and under
bracket pinch bolts.
Make sure the inner fork tube is flush with the
top of the handlebar.
3. Remove:
Shandlebar
4. Tighten:
Sunder bracket pinch bolt
Supper bracket pinch bolt
1
Scap bolt
2