Filter
Top Products
3-66
REPLACING THE HEADLIGHT BULBS
CHK
ADJ
WARNING
CAUTION:
EAS00183
REPLACING THE HEADLIGHT BULBS
The following procedure applies to both of the
headlight bulbs.
1. Remove:
Sfront cowling inner panels
Refer to “COWLINGS”.
2. Disconnect:
Sheadlight bulb cover
Sheadlight coupler
1
3. Remove:
Sheadlight bulb holder
1
4. Remove:
Sheadlight bulb
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
5. Install:
Sheadlight bulb
New
Secure the new headlight bulb with the head-
light bulb holder.
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
6. Install:
Sheadlight bulb holder
7. Install:
Sheadlight bulb cover
8. Connect:
Sheadlight coupler
9. Install:
Sfront cowling inner panels
Refer to “COWLINGS”.