Filter
Top Products
5700/5800 GPS Receiver User Guide 69
Software Utilities 7
5700 GPS Receiver Operation
10. If you click Exit, another screen appears asking you to confirm
that you want to quit the WinFlash software. Click
OK.
70.1 Adding frequencies for the 450 MHz internal radio
If your 5700 receiver has the optional internal radio installed, you can
use the WinFlash software to add frequencies to the default list.
To add radio frequencies:
1. Start the WinFlash software. The Device Configuration screen
appears.
2. From the Device type list, select 5700 Receiver.
3. From the PC serial port field, select the serial (COM) port on the
computer that the receiver is connected to.
4. Click
Next.
The Operation Selection screen appears. The Operations list
shows all of the supported operations for the selected device. A
description of the selected operation is shown in the Description
field.
5. Select Configure Radio and click
Next.