Trimble Outdoors 5700/5800 GPS Receiver User Manual


 
5700/5800 GPS Receiver User Guide 111
Setting up the Receiver 13
5800 GPS Receiver Operation
Figure 13.3 5800 receiver pole-mounted setup
13.1Other System Components
This section describes optional components that you can use with the
5800 receiver.
131.1 Radios
Radios are the most common data link for Real-Time Kinematic (RTK)
surveying. The 5800 receiver is available with an optional internal radio
in either the 450 or 900 MHz UHF band. You can also connect an
external radio to either port, whether the internal radio is installed or
not.
The 5800 receiver supports the following Trimble base radios with the
internal 450 MHz or 900 MHz UHF radios:
TRIMMARK™ 3
F
F
5800 GPS Receiver
ACU controller