Filter
Top Products
14 General Operation
116 5700/5800 GPS Receiver User Guide
5800 GPS Receiver Operation
Figure 14.1 shows the 5800 receiver front panel controls for the
power on/off functions, or receiver reset. The LEDs provide
power, radio, data logging, and SV tracking status information
.
Figure 14.1 Controls and LEDs on the front panel of the 5800 receiver
14.1Button Functions
The 5800 receiver has only one button, the Power button, represented
in this manual by
[P]. Use [P] to switch the receiver on or off, and to
perform other functions, as described in Table 14.1.
Note – The term “press” indicates that you should press the button and
release it immediately. The term “hold” indicates that you should press the
button and hold it down until the time indicated has elapsed.
Table 14.1 Power button functions
Action Power button
Turn the receiver on Press
Turn the receiver off Hold for 2 seconds
Delete the ephemeris file Hold for 15 seconds
Reset the receiver to factory defaults Hold for 15 seconds
Delete application files Hold for 30 seconds
F
Power button
SV Tracking
Radio
Power/Data status
LEDs