Filter
Top Products
5700/5800 GPS Receiver User Guide 133
Software Utilities 16
5800 GPS Receiver Operation
6. Select the latest version from the Available Software list and click
Next.
The Settings Review window appears. This screen prompts you to
connect the receiver, suggests a connection method, and then
lists the receiver configuration and selected operation.
7. If all is correct, click
Finish.
Based on the selections shown above, the Software Upgrade
window appears and shows the status of the operation ( for
example,
Establishing communication with the 5800. Please
wait…
).
8. Click
OK.
The Software Upgrade window appears again and states that the
operation was completed successfully.
9. Click
Menu to select another operation, or click Exit to quit the
WinFlash software.
10. If you click
Exit, another screen appears asking you to confirm
that you want to quit the WinFlash software. Click
OK.
160.1 Adding frequencies for the 450 MHz internal radio
If your 5800 receiver has the optional internal 450 MHz radio installed,
you must use the WinFlash software to add frequencies to the default
list.
To add radio frequencies:
1. Start the WinFlash software. The Device Configuration screen
appears.
2. From the Device type list select 5800 Receiver.
3. From the PC serial port field select the serial (COM) port on the
computer that the receiver is connected to.
4. Click
Next.